360 – 440 BHN
CVNL average values of 15ft. lbs at -40° F
Tensalloy™ 400 can be cut to your specifications with plasma, oxy-Acetylene, laser, and water jet as well as with abrasive cut off saws.
Drilling, countersinking, counterboring, tapping, milling, and general machining is performed with conventional equipment and carbide tools.
Tensalloy™ 400 is specially made for improved formability with low levels of carbon and sulphur for inclusion shape control.
Up to .75″ can be cold bent to minimum inside bend radius of 3t (where t is the plate thickness) with the bend axis transverse to the rolling direction. A radius of 4t can be used when bending parallel to the roll direction.
For plate over .750″ a radius of 6t is recommended when forming transverse to the rolling direction.
|Typical Chemical Composition|
|Thickness||1/8" through 8"|
|Width||48" to 120"|
|Available in plates|