Quote Request

tensalloy-pwsIf superior resistance against wear and impact is an important factor in your steel plate applications, then Clifton Steel’s Tensalloy™ 400 steel fills the bill. Its abrasion resistant properties ensure that it performs consistently each and every time … with no surprises.

The Tensalloy™ 400 wear resistant steel plate provides greater impact strength than other common heat-treated alloys. As a result, expect longer lasting wear parts in some of the toughest applications.

Because of all these benefits, Tensalloy™ 400 wear resistant and impact resistant steel has a wide range of general applications. In particular, it is an ideal substitute for almost all applications in which excessive wear is currently a problem and when ease of fabrication is needed. Additionally, this Tensalloy™ plate serves well for applications in which high impact is needed. They include bed liners, bucket liners, and all types of heavy machine equipment liners. This particular Tensalloy plate is also used for facings, loader cutting edges, drag bucket wear plates. More specialized uses of abrasion resistant steel are heavy-duty fan blades, wear straps, conveyor liners, teeth caps and many more.

At Clifton Steel, we are committed to working one on one with you to cut our Tensalloy™ 400 steel plate to your exact specifications. From outset to completion, we provide consistent and controlled quality so our Tensalloy steel plates perform exactly as you expect them to.

Allow us the opportunity to fabricate for you steel wear plates and parts that resist wear, abrasion and impact.

Tensalloy™ 400 Specifications

360 – 440 BHN

Impact Strength
CVNL average values of 15ft. lbs at -40° F

Tensalloy 400 can be cut to your specifications with plasma, oxy-Acetylene, laser, and water jet as well as with abrasive cut off saws.

Drilling, countersinking, counterboring, tapping, milling, and general machining is performed with conventional equipment and carbide tools.

Tensalloy 400 is specially made for improved formability with low levels of carbon and sulphur for inclusion shape control.

Up to .75" can be cold bent to minimum inside bend radius of 3t (where t is the plate thickness) with the bend axis transverse to the rolling direction. A radius of 4t can be used when bending parallel to the roll direction.

For plate over .750" a radius of 6t is recommended when forming transverse to the rolling direction.

Tensalloy has excellent weldability and can be welded with simple procedures and common consumables such as E7018.

Typical Chemical Composition
Thickness .188-
Carbon 0.20 0.17 0.17 0.25
Manganese 1.50 1.50 1.50 1.50
Phosphorus 0.025 0.025 0.025 0.025
Sulfur 0.005 0.005 0.005 0.005
Silicon 0.50 0.50 0.50 0.50
Chromium 0.45 0.20 0.60 0.20
Molybdenum 0.05 0.20 0.20 0.60
Boron - 0.003 0.003 0.003

Thickness 1/8" through 8"
Width 48" to 120"
Length 480"
Available in plates

Clifton Steel Company 16500 Rockside Road
Maple Heights, OH 44137




P: 216-662-6111
F: 216-662-6107
E: info@cliftonsteel.com