Products
|
Clif-Clad is produced by bonding a composite of Chromium-Iron-Carbon alloy and Chromium carbides to a carbon steel substrate. The result is a super-tough, abrasion-resistant, durable steel. Clifton Steel will fabricate Clif-Clad to your specifications.
| Clifton Steel guarantees the composition of Clif-Clad: | |
| Chromium | 30.0% |
| Carbon | 5.0% |
| Manganese | 1.75% |
| Molybdenum | 1.25% |
| Silicon | 0.45% |
| Nickel | 0.10% |
| Sulphur | 0.015% |
| Phosphorous | 0.013% |
| Boron | 0.005% |
| Hardness | 600 BHN |
| Backing plate | carbon steel | |
| Clif-Clad is designed for applications that demand: |
| Certified composition |
| 600 Brinell |
| Superior wear-resistance |
| High impact properties |
| Good weldability |
| Formability | |
Clifton Steel offers the following stock sizes:
1/2" x 90" x 117" (1/4" overlay on 1/4" carbon steel)
3/8" x 90" x 117" (1/8" overlay on 1/4" carbon steel)
5/8" x 90" x 117" (1/4" overlay on 3/8" carbon steel)
3/4" x 90" x 117" (3/8" overlay on 3/8" carbon steel)
1" x 90" x 117" (1/2" overlay on 1/2" carbon steel)
More about Clif-Clad...
-Approaches ceramic in wear life, but takes significantly more impact.
-Can be engineered into fabrications.
-Designed for severe impact and abrasion.
-Direct replacement for AR type liners, wear plates, ceramics, and cast segments.
-Good weldability due to its low carbon-based material.
-Provides superior hardness, yet remains formable.
-Replaces hardfacing in field at lower costs.
-Retains hardness at high temperatures.
Clif-Clad Applications
| Bark chutes | Butterfly valves | Chipper hoods |
| Classifier cones | Clinker chutes | Coal chutes |
| Conveyer wear strips | Cyclone liner plates | Dozer blades |
| Elbows | Fan blades | Feeders |
| Flatback elbow liners | Flop gates | Grizzly deck plates |
| Hoppers | Mining equipment | Reclaimer buckets |
| Replaceable liners | Screw flights | Target doors |
| T-injectors | Transition/chute liners | Truck beds |
| Wear pads | Wear-resistant piping |
|
