Products
|
Manual & Flux-Cored S.A. Feed Wire:
High-Strength Joining and Buildups
Clifton Tensamang Welding Rods and semiautomatic Flux-Cored Feed Wire are made from austenitic manganese steel containing nickel and chromium. Both Rod and S.A. Wire can be used to join any metal, and to lay down a tough, long-wearing 14% manganese deposit with minimum spatter loss.
Deposit thickness can be varied as needed, and can be easily flame cut. Use Clifton Tensamang Welding Rod to achieve needed combinations of high-impact moderate abrasion, medium abrasion, and hot wear corrosion. It may also be used to join manganese steel to carbon steel.
Clifton Tensamang Welding Rod is outstanding for
| crusher rolls and mantles |
breaker bars and hammer mill hammers |
| dipper repair and build up of teeth and lips |
tractor |
| rollers |
rails |
| sprockets |
rolling mill spindles and couplers |
| dredge pump shields |
cutter heads |
| manganese plate fabrications for bins, hoppers, and more |
Clifton Tensamang Welding Rod is stronger and tougher than stainless. It has a stable arc, with no slag-popping. Low hydrogen coating provides crack-free welds.
14% Manganese provides for extreme abrasion and high impact. Both Tensamang Manual Rod and S.A. Flux-Cored Wire are outstanding for crack-free building up and strength-welding of manganese steels in applications requiring work-hardening under impact. Because it is unaffected by moisture and humidity, Tensamang Rod and S.A. Wire require no special storage for extended shelf life.
Semiautomatic Flux-Cored Tensamang Wire
Here is a precision formulation of high (14%) manganese/chrome/nickel alloy that provides high strength, ductility, and crack resistance. Precision die drawn of prelubricated tubular wire, Flux-Cored Tensamang assures smoothest open-arc deposition, and depositions that work-harden under impact. Semiautomatic Flux-Cored Tensamang Wire is easy to run through any semiautomatic welder, with no slag popping.
Tensamang High-Strength Rod and S.A. Wire
Tensamang Specifications:
Physicals: Rod-tip color, silver. Low-hydrogen extruded coating composite. AC or DC reverse polarity. 200 BHN as welded; 500 BHN work-hardened.
Flux-Cored Wire: Die drawn, prelubricated 14% manganese steel with chromium and nickel. Nonmagnetic. Current: reverse polarity 220-350 amperes.
| Tensile strength | 120,000 psi |
| Yield strength | 70,000 psi |
| Elongation | 40% |
| Reduction of area | 35% |
| Recommended Rod Amperage Range |
| Diameter | AC: Amperes | DC: Amperes |
| 1/8" x 14" | 100-160 | 100-160 |
| 5/32" x 14" | 120-160 | 120-160 |
| 3/16" x 14" | 170-225 | 170-225 |
| 1/4" x 18" | 220-300 | 220-300 |
Tensamang Rod Standard Package:
50 lb. box of five 10 lb. packages
Tensamang Flux-Cored S.A. Feed Wire Standard Package
7/64" diameter wire, 55 lb. coils standard.
Also 1250 lb. and 200 lb. POP.
|
