Manganese: Tensamang

Clifton will fabricate parts to customer prints.
Tensamang is an austenitic manganese steel with unusual shock resistant properties that improves in hardness under shock and abrasion to ultimately reach a hardness of 550-600 Brinell. The work-hardening ability of this super-strength steel reduces replacement costs, as it outlasts conventional plate by as much as 12:1, and frequently more under the most severe shock conditions

Tensamang acquires a highly-polished, hardened surface finish with less friction, assuring easy, positive flow of abrasive bulk materials including ores, aggregates, core sand, coal, and heavy casting, increasing produciton with attendant savings of time and cost.

Some examples of Manganese fabrications

Electromagnetic bottom plates

Shot blasting machine parts

Auto shredder liners

Barrel heads

Crusher and chute liners

Woven wire and perforated plate

Conveyer flights

Tables, decks, trees, and manipulator arms

Shot Blast Tree

Electromagnetic Bottom Plates

Hooks

Forming: Tensamang should be cold-formed. Consult Clifton Steel for difficult applications.

Welding: Welding is easily accomplished with Tensamang Electrode or S.A. Wire, or AWS 303 or 304 stainless electrodes. Ductility will be increased in the fusion zone by peening.

Cutting: Tensamang can be cut with standard torch equipment.

Woven Wire Screen

Perforated Plates

Fused Wire Screen

Plate is available in 4', 5', and 6' width, 10', 12', and 20' length, from 3/16" to 2" thickness.

Rounds are available from 3/8" to 3" diameter.

Flats are available in 1", 1-1/2", 2", 2-1/2", 3", 4", and 6" widths, with thickness from 1/4" to 1".

Shot Blast - Pouring Floor
14% Manganese steel Replacements

Longer wearing, cost-saving, installation-ready replacement parts are fabricated to OEM specifications of special, high-strength alloys by Clifton Steel in its complete specialty steel service center. You get doublt the wear life and cost savings over conventional foundry steels. For instance, Tensamang 14% manganese steel, for the toughest shock and impact applications, work-hardens and improves with use.

Shot Blast Floors Fabricated bar gratings of Tensamang alloy set new standards for wear life.	Shakeout Decks Flame cut from Tensalloy and heat treated to 500 Brinell	Manipulator Arm
Shot blasting machine showing barrel heads and flights	Barrel heads and liner plates made from Tensamang resist shock and wear; supplied installation-ready.	Conveyer Flights fabricated to your OEM specifications of tough, shock-resistant Tensamang (14% Manganese) alloy. Optional Tensalloy high alloy heat treated up to 500 Brinell.